• Push-fit technology
• Quick disconnection without the need for tools
• 1/4″ Tube to 1/4″ Hose Stem
• Food Quality and suitable for potable liquids
• Suitable for soft metal or plastic tubes
• Suitable for air or inert gases
• Superior flow characteristics

Buy this Acetal John Guest 1/4 “tube to 1/4″ hose stem. It features push-fit technology, allowing for quick connection of a 1/4″ tube to a 1/4” hose, resulting in a secure and leak-resistant connection.

The post Acetal John Guest 1/4 Tube to 1/4 Hose Stem appeared first on H2O Distributors.

John Guest 3/8″ Union Elbow (Acetal) Features:

• Push-fit technology
• Quick disconnection without the need for tools
• High chemical resistance
• Food Quality and suitable for potable liquids and pure water applications
• Acetal fittings are suitable for air and inert gases, and can be used on N2/CO2 mixed gas dispensing lines, as well as in pneumatic applications and vacuum lines.

This fitting is made of the following components:

• The body is produced in acetal copolymer
• O-rings are nitrile rubber
• The collet is produced in acetal copolymer with stainless steel teeth

The post John Guest 3/8″ Union Elbow (Acetal) appeared first on H2O Distributors.

The same fitting without the flow restrictor is installed on the inlet port of the QL3 Head.

Fitting can also can be used for other applications where 1 GPM Flow is needed.

The fitting accepts 1/4″ OD Plastic of Copper Tubes and has 3/8″ MPT.

Features:

• Push-fit technology
• Quick disconnection without the need for tools
• High chemical resistance
• Food Quality and suitable for potable liquids and pure water applications
• Acetal fittings are suitable for air and inert gases and can be used on N2/CO2 mixed gas dispensing lines and in pneumatics applications and vacuum lines.

This fitting is made of the following components:

• The body is produced in acetal copolymer
• ‘O’Rings are nitrile rubber
• The collet is produced in acetal copolymer with stainless steel teeth

The post John Guest 1/4″ JG x 3/8″ NPTF Male Connector with 1 GPM Flow Restrictor appeared first on H2O Distributors.

Features:

• High chemical resistance
• Food Quality and suitable for potable liquids and pure water applications
• Acetal fittings are suitable for air and inert gases and can be used on N2/CO2 mixed gas dispensing lines and in pneumatics applications and vacuum lines.

This fitting is made of the following components:

• The body is produced in acetal copolymer

The post John Guest 3/8″ Tube x 1/4″ NPTF Stem Adaptor (Acetal) appeared first on H2O Distributors.

Features:

• Push-fit technology
• Quick disconnection without the need for tools
• High chemical resistance
• Food Quality and suitable for potable liquids and pure water applications
• Acetal fittings are suitable for air and inert gases and can be used on N2/CO2 mixed gas dispensing lines and in pneumatics applications and vacuum lines.

This fitting is made of the following components:

• The body is produced in acetal copolymer
• ‘O’Rings are nitrile rubber
• The collet is produced in acetal copolymer with stainless steel teeth

The post John Guest 1/2″ x 1/2″ x 3/8″ Reducing Branch Tee (Acetal) appeared first on H2O Distributors.

Features:

• High chemical resistance
• Food Quality and suitable for potable liquids and pure water applications
• Acetal fittings are suitable for air and inert gases and can be used on N2/CO2 mixed gas dispensing lines and in pneumatics applications and vacuum lines.

This fitting is made of the following components:

• The body is produced in acetal copolymer

The post John Guest 1/4″ Tube x 1/4″ NPTF Stem Adaptor (Acetal) appeared first on H2O Distributors.

Features:

• Push-fit technology
• Quick disconnection without the need for tools
• High chemical resistance
• Food Quality and suitable for potable liquids and pure water applications
• Not suitable for compressed air and vacuum applications

This fitting is made of the following components:

• The body is produced in polypropylene

The post John Guest 1/2″ Plug appeared first on H2O Distributors.

Features:

• Push-fit technology
• Quick disconnection without the need for tools
• High chemical resistance
• Food Quality and suitable for potable liquids and pure water applications
• Acetal fittings are suitable for air and inert gases and can be used on N2/CO2 mixed gas dispensing lines and in pneumatics applications and vacuum lines.

This fitting is made of the following components:

• The body is produced in acetal copolymer
• ‘O’Rings are nitrile rubber
The collet is produced in acetal copolymer with stainless steel teeth

The post John Guest 3/8″ x 3/8″ NPTF Male Connector (Acetal) appeared first on H2O Distributors.

The same fitting without the flow restrictor is installed on the inlet port of the QL3 Head.

Fitting can also can be used for other applications where .5 GPM Flow is needed.

The fitting accepts 1/4″ OD Tubes and has 3/8″ MPT.

Features:

• Push-fit technology
• Quick disconnection without the need for tools
• High chemical resistance
• Food Quality and suitable for potable liquids and pure water applications
• Acetal fittings are suitable for air and inert gases and can be used on N2/CO2 mixed gas dispensing lines and in pneumatics applications and vacuum lines.

This fitting is made of the following components:

• The body is produced in acetal copolymer
• ‘O’Rings are nitrile rubber
• The collet is produced in acetal copolymer with stainless steel teeth

The post John Guest 1/4″ JG x 3/8″ NPTF Male Connector with 0.5 GPM Flow Restrictor appeared first on H2O Distributors.

Features:

• Push-fit technology
• Quick disconnection without the need for tools
• High chemical resistance
• Food Quality and suitable for potable liquids and pure water applications
• Acetal fittings are suitable for air and inert gases and can be used on N2/CO2 mixed gas dispensing lines and in pneumatics applications and vacuum lines.

This fitting is made of the following components:

• The body is produced in acetal copolymer
• ‘O’Rings are nitrile rubber
• The collet is produced in acetal copolymer with stainless steel teeth

The post John Guest 3/8″ x 1/2″ NPTF Male Connector (Acetal) appeared first on H2O Distributors.